Building Instructions

Building instructions for the LEGO Mindstorms EV3 robot used for accomplishing WRO 2014 mission. It is the full robot with the lift at the top

Building instructions for a robot for the World Robotics Olympiad Sputnik competition. This is the light version without the lift at the top.

Building instructions for this LEGO Mindstorms EV3 robot used in the World Robotics Olympiad Junior competition

Building instructions for the robot build with LEGO Mindstorms EV3. It is called "Frankenstein" because the two motors are in two different directions.

Building instructions for this LEGO Mindstorms EV3 robot base that could be used in FIRST LEGO League, World Robotics Olympiad and other robotics competitions

Building instructions for a LEGO Mindstorms Base Chassis with a reversible motor

Note: This robot contains wheels that are from the NXT set.

This LEGO Mindstorms EV3 robot chassis has the brick positioned vertically. Interesting idea that could be very useful.

A LEGO Mindstorms EV3 Chassis with wheels at the front. Built with the EV3 set you can use this robot chassis as a base for extending with attachments. 

Building instructions for a LEGO Mindstorms EV3 Robot Base with 56mm Tires, Version1. The robot base could be used in robotics competitions as FIRST LEGO League, World Robotics Olympiad and others

Modification of the EV3 Competition Robot Full with light sensors attached to the front

A chassis built with LEGO Mindstorms EV3 parts designed for World Robotics Olympiad

This WRO robot is designed to collect a lot of ping pong balls in its container. It's built with LEGO Mindstorms EV3 45544 and 45560 sets. These are the LEGO Educational sets. The robot has two chains that collect the balls and push them into the container attachment. This is one of the larges robots we've uploaded at FLLCasts yet. You could learn a lot by following the building instructions and paying attention to the details of how this robot is built. All the alignment, all the connections. Really beautiful.  

The first of a series of attachments that we add to a World Robotics Olympiad LEGO Mindstorms Robot. The attachment is an example for collecting ping-balls. The robot and the attachment are in the same construction. The attachment is a base for a container that could be extended.

Robot for collecting ping pong balls used in the World Robotics Olympiad competitions. It is constructed with LEGO Mindstorms EV3

This is a ping-ball containing attachment for a World Robotics Olympiad. The attachment is building with LEGO Mindstorms EV3 parts. It is tiltel so that it is easier for the balls to fall off at certain points, which was part of the missions at the 2015 cmpetition. 

This is one of the robots used in World Robotics Olympiad. It uses chains to move ping pong balls out of a container.

LEGO Mindstorms Robot Base for a high placed attachment for containing ping pong balls. It is interesting how the balance is achieved with such an attachment. It was only one of the version in a series of LEGO Mindstorms Robots for World Robotics Olympiad.

Building instructions for a Robot Grabber used in the World Robotics Olympiad competition runs. The grabber is build with LEGO Mindstorms EV3. The base of the robot is available at /materials/69-wro-robot-2014-elementary 

Building instructions for the robot used in WRO 2014. It is a small robot with two light sensors and could be used for collecting elements. 

The robot is built from LEGO Mindstorms EV3 parts. 

The instructions for building the improved EV3 Competition Robot by Mic Lowne