Building Instructions -

• Java

These are 3D Building Instructions for the Movie Set mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.

These are 3D Building Instructions for the Masterpiece mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.

This is an attachment for the top of the robot and the attachment is used for lifting different parts. It is reusable as we could change the lever and use the attachment for a number of different missions.

This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Pull-up bar mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.

Here are the building instructions for the Turning attachment for Tricky - the Mindstorms 51515 Robot Inventor robot. Tricky might be the smallest robot, built with this set, but it will surprise you with its abilities to spin the ball. If you build this Turning attachment for Tricky, you could try to play a crazy little bowling game with it. As the robot is spinning the ball, you can program it to move forward and then stop, so the ball could go forward (hopefully towards the bowling pins). You can play to see who will be the first to make a strike. The Mindstorms/Duplo ball and the bowling pins are included in the set.

You can find the LEGO set, with which this was built, by following this link

You can find other attachments for Tricky, by following the links below:

1. Basketball attachment
2. Kick the ball attachment
3. Writing attachment
4. Ball grabbing attachment

You can find constructions created to play with Tricky, by following the links below:

1. Bowling Pins
2. Football Goal
3. Chain Reaction
4. Basketball hoop

This is the field used in FLLCasts Off-season Challenge 2019. The pdf should be downloaded and printed 1:1. It is best if it is printed on durable canvas such as vinyl. Although we do not recomend it, the field can be printed on regular paper.

This is a little robot that doesn't like its switch touched. It will return the switch back every time it's touched and react in a variety of ways.

The program for controlling the robot is available at /programs/wc7iqy-program-for-ev3-finger-bot

It's the second version of the Robot Base 4, but with rotated inside motor.

Building instructions for the LEGO Mindstorms robot attachment used at the FIRST LEGO League Natures Fury Competition. This robot attachment takes two of the building and moves them without demolishing them. It is a good example of the use of gear wheels and worm gear. The gear wheels move levers in opposite directions. 

A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.

The offset beam creates a hook-like motion when rotating the gear, making "hooking" in loops an easy task.

Introducing Kufar! In Bulgarian, Kufar means "suitcase," and just like a suitcase, this robot is easy to "pack" with different attachments for each task.

Unlike traditional box robots, Kufar is an "out-of-box" design, enabling fast, easy attachment swaps. This flexibility allows teams to build a new chassis with customized attachments for each run, making transitions quick but requiring more parts and careful handling due to its gear transmission, which can sometimes cause gear slippage or play.

To improve precision, Kufar’s gear transmission is optimized for lower speeds. Kufar also includes a color sensor to detect specific colored bricks on attachments and a force sensor to start corresponding programs. With two motors for movement and one for attachments, Kufar is compact, efficient, and easy to handle, especially with its sturdy top handle.

We thoroughly enjoyed exploring this innovative concept and hope you find it equally fun and inspiring!

These are 3D Building Instructions for M04 Coral Reef mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Coral Reef for additional building possibilities.

"Muni" is short for mountain unicycles - Munis.

This robot is designed to resemble a clown on a unicycle. It uses a large technic gear ring to move forward and backward. On top of the robot is a force sensor, disguised as a clown. You can program it so that when you touch its head, the robot starts!

In Scottish Celtic, "asal" means "donkey."

The robot is designed to resemble a beast of burden. It moves with its four legs, which are connected in pairs to motors on the left and right sides. On its back, it has a platform connected to a force sensor, which can be used to measure if the robot is carrying too much cargo.

These are 3D Building Instructions for the Virtual Reality Artist mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.

3D building instructions for the solar farm energy unit in FIRST LEGO League 2022. Find the parts in Bag 1

This reusable attachment could easily be placed on the side of a LEGO MINDSTORMS Robot Inventor robot and accomplish different missions that require the robot to interact with mission models. It uses gear wheels.

This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Boccia mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.. With this attachment we follow the line with the robot until we reach the team mission and we use the lever on the top to push the blue box. Then we follow the line to reach the Boccia mission, and three things happen: 1. align to the mission model with the front of the attachment, 2. turn the lever to release the green boxes and 3. move the lever to push on the mission model. This is a complex mission requiring a lot of coordination from the robot. Quite interesting I must say.

I was looking around the house and thought, "This will be fun for the kids—let’s build a coffee machine." Little did I know just how fun it would be!

Built from the LEGO SPIKE Core Set 45678 and the LEGO SPIKE Expansion Set 45680, this coffee machine has a lid that can be opened and closed, and it's the perfect size for the hands of a 6–10-year-old child.

What my daughters did with it was have coffee with their other toys. They had fun building it, and found it especially exciting that the lid could open and close. As an engineer, I also took the opportunity to tell them a bit about the valve on the machine and why it's needed.

Best ~2 hours of play for this week!

Estimated weekly play time: ~2 hours in total.

This module is made to look and move like the beak of a bird! It uses two technic steering links powered by a medium motor to close and open! It can be combined with other modules to make the best bird robot! This module is a part of Lintu - a LEGO Mindstorms EV3 Kiwi bird robot.