Voli - LEGO Mindstorms EV3 robot measuring volume
Value was inspired by the spy vehicle robot. This little robot was built to measure the volume of the room he's in.
- #761
- 10 May 2019
We try to explain some basic laws of Physics with these resources. Sometimes there are calculations, but we try to keep it visual and to move step by step.
Graphical elements from: www.thenounproject.com
Value was inspired by the spy vehicle robot. This little robot was built to measure the volume of the room he's in.
Building instructions for a LEGO robot that shoots 40 mm ping pong balls. The shooting mechanism is powered by two EV3 Large motors, while the whole mechanism is rotated by a medium motor. The robot can store up to 6 ping pong balls and has a Ultrasonic Sensor to detect targets.
This was an idea. You would we demonstration a multi-axle power and rotation transmitting box. Well, here it is. Build it. Start it. And see how the power from the motor is transmitted through different axles. The lever will demonstrate it.
There is a lot of physics and math involved when learning with LEGO Mindstorms EV3 robots. It is generally "difficult" to include them directly during classes because students are coming for "something funnier" and at the same time, they could be of different ages. But Inertia is a pretty common topic that is quite easy to introduce to students, especially with a robot.
The robot moves and stops. What will happen with the cargo when the robot stops? Naturally, the cargo will continue moving and this is dangerous. For how long, what would be the energy? All these are things that could be discussed with this robot.
The robot is not completely finished because you have to finish it and decide on the wheels to be used.
User this flywheels construction for experiments in physics. Start rotating the wheel and they would accumulate energy. You can try to calculate this energy and to measure how fast it would be consumed.
The construction is built with LEGO Mindstorms EV3
Kiril Mitov's most favourite attachment. To quote him "I had a really great fun building this attachment and recording the videos for it".
It's an attachment with a Rubber band and a Flywheel and a Gear Wheel and a Worm Gear. So much knowledge in just one small attachment. The goal of the attachment is to be able to have an active attachment without actually having a motor. So you can place that attachment and it will do the work for you instead of using a motor to power it.
Build with LEGO Mindstorms EV3 set.
When placing the rubber bands check out the tutorials
Placing the white rubber band is shown at https://www.fllcasts.com/tutorials/105-rubber-band-attachment-with-a-flywheel-solving-fll-2014-search-engine-part-2 at around 05:40.
Placing the red rubber band is shown at https://www.fllcasts.com/tutorials/104-rubber-band-attachment-with-a-flywheel-solving-fll-2014-search-engine-part-1