This robot was made to count coins. The door slides, making the gyro sensor rotate, and by doing that, allowing the robot to measure the size of the coin that enters the safe. By changing the points where the gyro's beam connects, the sensor's thresholds change.
This is the attachment of Team "Nightbeast", with which they :
1. Inserts the Tube Module into the Habitation Hub port, west side
2. Move all four Core Samples so they are no longer touching the axle that held them in the Core Site Model
3. Place the Gas Core Sample completely in Base
From missions M05 and M06 from FLL Into Orbit Challenge
This is the attachment of Team "Nightbeast", with which they solve M01 and M02 from FLL Into Orbit Challenge
This is the attachment of Team "Nightbeast", with which they do:
M11–Escape Velocity and M13–Observatory
The Observatory result depends on the model. Sometimes the pointer is in the orange area otherwise in the white area.
Value was inspired by the spy vehicle robot. This little robot was built to measure the volume of the room he's in.
The name comes from the worlds most expensive yacht, History Supreme, purchased for around 5 billion US dollars form an anonymous Malaysian buyer.
Robotics Supreme is a robot made to resemble a yacht. For that purpose it is made to look very long and its front comes to one point. It uses two large motors with tyres to move. On the front it also has a color sensor, placed so the robot can follow a line. On the back it has a Gyro sensor, so that it can turn correctly.
Uylam is a robot that simulates a stormy environment for its ship. It is made using two piston-like mechanisms powered by a Large motor and offset by 90 degrees to create shaking similar to that of big waves. The ship itself is made out of a medium motor on a turntable and a gyro sensor attached to them. The purpose of this is to explore what is the best position of a ship compared to the waves, so that it sustains the least amount of shaking.
This attachment accomplishes the Into Orbit Space Walk Emergency mission from the FIRST LEGO League Into Orbit 2017-2018 competitions. The base robot is the SUV Competition Box Robot from LEGO Mindstorms EV3.
The program for this attachment is at Programs/w415dz-fll-2018-attachment-to-accomplish-the-into-orbit-space-walk-emergency-07-robot-game-missions-program.
Soon we would publish and a video of how the attachment works.
Rollbar is a handy device, which only purpose is to measure lengths. Its main purpose is to measure curved lines.
It's designed for right-handed people, but with some small adjustments, it could fit any palm.
This is one of the spacers that the Nightbeast team used in FLL 2018/19 Into Orbit Challange
One of the spacers that the Nightbeast team used in FLL 2018/19 Into Orbit Challange
This is a LEGO Mindstorms EV3 competition robot used in FIRST LEGO League Season 2018-2019 Into Orbit following a Box Robot principle. The robot has passed through the following competitions in Brazil:
Local competition in scho
Regional: Northeast
National: Rio de Janeiro
International: Uruguay
The robot is an modular construction that you could easily build upon. It is not entirely "clean" as it has parts of it not optimezed as in the other box robots, but it is a nice example and a great work from the FLL team.
This is a LEGO Mindstorms EV3 competition robot used in FIRST LEGO League competitions and used by a team in Brazilian regionals. It followsa Box Robot principle. The robot has passed through the following competitions in Brazil:
Local competition in scholl
Regional: Northeast
National: Rio de Janeiro
International: Uruguay
It is not entirely "clean" as it has parts of it not optimezed as in the other box robots, but it is a nice example and a great work from the FLL team.
Laboratory 2.0 is a second and lighter version of the Laboratory. The new version of the robot replaces its motor with a gyroscope and uses a lightweight flip. Programming this robot requires a well-developed abstract thinking. The main purpose of the robot is to measure the volume of the bubble placed in it only by the values measured by the sensors.
The construction has a valve with which you can let the air out of the balloon at different speeds.
How exactly the balloon is placed in the robot is explained in this lesson.
The Laboratory is a robot that tests your programming skills. You will have to measure the volume of a balloon, only by the values you receive from the sensors.
It has a valve, that allows you to deflate your balloon at different rates.
How to place the balloon in the robot is explained in this tutorial.
Sebastian is a six-legged creature, which technically makes it not-a-crab. Anyway, it still walks sideways and is amazing to build and watch.
You can find the program for Sebastian here.
This a the Dinore3x, the predecessor of the mighty Triceratops. This is one of the classic EV3 robots provided by LEGO.
Gen comes from Gendema, a bulgarian late 80s rock band, popular with its song about pedalos.
The robot uses two EV3 Large motors to move, but instead of wheels it uses four-legged paddles, attached to the motors. This makes it look like a pedalo. Additionally it slides on the ground much like a real pedalo on the water.
Because of the strange mechanism of movement, the robot has a gyro sensor to help it keep a straight line.
Barco from spanish means boat.
The robot is made to look like a sail ship. The sails are made out of technic panels, attached in various ways to create the best look. Otherwise the robot uses two motors with tyres to move. At the back of the robot there is a Gyro sensor, which helps it maneuver.
This robot is a spin-off of the Useless machine built from LEGO Mindstorms EV3. This robots mission is to be the last to press the button it holds.