Building Instructions -

• EV3-G

-

• LEGO Education SPIKE Prime

This construction is ment as a addition to the base line following robot with exposed sensor.

A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.

This attachment is designed to detach, once it completes its purpose. This is done, so that the team loses less time switching attachments in the base, lowering the chance of human error during the competition.

This is an alternative mission model for FIRST LEGO League 2022-2023 SUPERPOWERED Hybrid Car mission model. It is alternative as you only need LEGO Education SPIKE Prime parts to build it and you don't need the real parts from the real competition

This is an alternative model for the FIRST LEGO League 2022-2023 SUPERPOWERED built only with LEGO Education SPIKE Prime parts. The goal of the model is to be able to experiment and learn without the need to have the real parts, that at this moment are almost impossible to find and gather.

This is an alternative model for the FIRST LEGO League 2022-2023 SUPERPOWERED build only with LEGO Education SPIKE Prime parts. The goal of the model is to be able to experiment and learn without the need to have the real parts, that at this moment are almost impossible to find and gather.

This is an alternative model that could be built from parts available in the LEGO Education SPIKE Prime set. Use the model to learn how to accomplish missions like this.

This 3D instruction is a LEGO alternative model similar to the FIRST LEGO League 2021-2022 Cargo Connect Crane mission model. It's build from parts that are available in LEGO Education SPIKE Prime and LEGO Mindstorms EV3.

This is an alternative FIRST LEGO League mission model similar to the bridge mission model from the FIRST LEGO League 2021-2022 Cargo Connect robotics competitions. With this model you can practice preparing for missions the require pushing down and connecting.

Alternative to Bag 13 - Truck Airplane and Activators Alternative Model - FIRST LEGO LEAGUE 2021 - 2022 CARGO CONNECT

This is a pinless attachment for a LEGO Education SPIKE Prime robot that uses the Ultrasonic sensor. The attachment could be placed on top of the robot. As it is pinless, it is easy to quickly place and remove it.

In Dutch, "muur" means "wall."

This robot is designed to have a wall in front of it to clear obstacles.

The instructions below provide an example of a wall that students can use in front of their robot if they are having difficulty creating one.

This attachment is designed for the Smaller Pancake - SPIKE Prime Box Robot and completes Mission 09: What’s on Sale? in the FIRST LEGO League 2025-2026 UNEARTHED competition. It pulls the horizontal axle to raise the roof, then presses the lever to lift the wares.

This attachment is designed for the Smaller Pancake - SPIKE Prime Box Robot and is used to complete Mission 05: Who Lived Here?, Mission 06: Forge, and Mission 07: Heavy Lifting in the FIRST LEGO League 2025-2026 UNEARTHED competition. The attachment positions the robot accurately in front of the mission models and interacts with each mechanism in sequence. In one run, it presses the Forge lever to release the stones, activates the Who Lived Here? model, and pushes a stone into the Right base. In a separate run, it pushes or captures the Millstone and transports it to the Right base.

This robot is designed to lift a cup smoothly while keeping it upright. With a motor attached to the side of the Hub, the robot can raise the cup to different angles.

With a few adjustments, you could even replace the LEGO cup and try lifting a real one. Just be careful with liquids - the robot doesn’t enjoy drinks as much as you do!

Xogo means “game” in Galician.

The robot moves using two medium motors. It has a distance sensor in the front to detect the next robot and a force sensor in the back to detect the robot behind it in the relay. Build two or more robots and you can create a whole relay!

These are 3D Building Instructions for an Alternative M14 Research Vessel mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. For the original mission model, see M14 Research Vessel.

This example hook for the Nautiq robot is designed to attach other attachments to the wall during the FIRST LEGO League 2024‑2025 SUBMERGED competition. It is provided as a sample; the best hooks are custom-made to match the attachments they are intended to hold.

This attachment for the Nautiq robot is designed to align the robot to the wall during the FIRST LEGO League 2024‑2025 SUBMERGED competition. It ensures consistent positioning for reliable mission execution.

These are 3D Building Instructions for an Alternative M03 Coral Reef mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. For the original mission model, see M03 Coral Reef.

These are 3D Building Instructions for an Alternative M09 Unexpected Encounter mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. For the original mission model, see M09 Unexpected Encounter.