These are all the robot building instructions. By visiting each building instruction you could see the Tutorials and Courses and Lessons in which it is used.
This attachment for the Nautiq robot is designed to align the robot accurately during the FIRST LEGO League 2024‑2025 SUBMERGED competition. It improves positioning consistency, helping ensure precise and repeatable mission runs.
This attachment for the Nautiq robot is designed to accomplish M07 Kraken’s Treasure and M06 Raise the Mast from the FIRST LEGO League 2024‑2025 SUBMERGED competition. It features a passive treasure chest collecting mechanism and uses hooks to restrict the inertia-driven movement of the Mast, allowing fast movements without triggering it prematurely.
This attachment for the Nautiq robot is designed for missions M13 Coral Reef, M12 Raise the Coral, and M09 Release the Shark from the FIRST LEGO League 2024-2025 SUBMERGED competition. It features a passive mechanical trigger that releases a lever powered by a rubber band. A passive curtain mechanism is included for collecting parts from the field. The attachment is optimized for quick and reliable mission execution without additional motors.
This attachment for the Nautiq robot is designed to accomplish M15 Research Vessel in the FIRST LEGO League 2024‑2025 SUBMERGED competition. It includes one detachable part: the hook is removed after collecting the Research Vessel, and the remaining part is used to deliver it to its target location.
This attachment for the Nautiq robot is designed to collect the Trident Parts for M14, deliver the Shark for M02, and collect one Krill for M12 in the FIRST LEGO League 2024‑2025 SUBMERGED competition. It features a passive trigger for the krill collection and aligns the robot with the mission model before collecting the trident parts.
This attachment for the Nautiq robot is designed to lift the coral for M01 Coral Nursery from the FIRST LEGO League 2024‑2025 SUBMERGED competition. It performs two actions simultaneously: lifting the mission model loop and opening the door that holds the Reef Segments.
This set of two attachments for the Nautiq robot is designed to collect and deliver the scuba diver for M01 Coral Nursery and M04 Scuba Diver, collect the shark for M02 Shark, and flip the coral reef for M03 Coral Reef in the FIRST LEGO League 2024‑2025 SUBMERGED competition. One attachment is mounted from above, and the other from below, allowing efficient execution of multiple missions in a single run.
This simple active pinless attachment for the Nautiq robot is designed specifically to accomplish mission M08 Artificial Habitat in the FIRST LEGO League 2024‑2025 SUBMERGED challenge. It offers a minimalist, efficient mechanism ideal for reliably completing the mission. No motors are required—setup is quick and intuitive. The compact design ensures stable performance and easy integration with the Nautiq robot.
This set of two attachments for the Nautiq robot is designed to solve multiple missions from the FIRST LEGO League 2024‑2025 SUBMERGED competition. It completes M05 Angler Fish, collects 4 Krills for M12 Feed the Whale, gathers all Reef Segments for M03 Coral Reef, and collects all Samples for M14 Sample Collection. The two-attachment design allows for efficient execution of multiple tasks in a single run.
This attachment for the Nautiq robot is designed to accomplish M10 Send over the Submersible in the FIRST LEGO League 2024‑2025 SUBMERGED competition. It uses a gear mechanism to lift a LEGO axle, allowing the submarine to slide to the other side.
This is an attachment for Kufar - Easy SPIKE Prime out-of-box robot. The attachment solves the light show mission using rubber bands! It works well, but it does depend on how new your model is. On newer models it can work with only 2 red rubber bands or even with 2 yellow and 2 red. Find the best combination for your field.
The trigger for the light show mechanism also releases Anna the Museum Curator and the masterpiece on the pedestal.
This is an attachment for Kufar - Easy SPIKE Prime out-of-box robot. It solves M10 Sound Mixer using a passive attachment and collects Noah, the sound engineer using an inertial attachment.
This is an attachment for Kufar - Easy SPIKE Prime out-of-box robot. It is an experiment we did that didn't work out for the FLL 2023-2024 MASTERPIECE field, but is interesting nonetheless. It shows how you can take an out-of-box robot and put a steering mechanism on it.
A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.
This attachment is designed to detach, once it completes its purpose. This is done, so that the team loses less time switching attachments in the base, lowering the chance of human error during the competition.
A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.
This attachment is designed to detach, once it completes its purpose. This is done, so that the team loses less time switching attachments in the base, lowering the chance of human error during the competition.
A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.
This attachment is designed to detach, once it completes its purpose. This is done, so that the team loses less time switching attachments in the base, lowering the chance of human error during the competition.
A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.
This attachment is designed to be thrown back to the base, with the lifted model it collected, before the robot returns, so the team can start loading the model to the next attachment, while the robot is still moving. This is done, so that the team loses less time switching attachments in the base, lowering the chance of human error during the competition.
