Building Instructions -

• FIRST LEGO League

-

• Lift

-

• LEGO Education SPIKE Prime

This set of two attachments for the Nautiq robot is designed to collect and deliver the scuba diver for M01 Coral Nursery and M04 Scuba Diver, collect the shark for M02 Shark, and flip the coral reef for M03 Coral Reef in the FIRST LEGO League 2024‑2025 SUBMERGED competition. One attachment is mounted from above, and the other from below, allowing efficient execution of multiple missions in a single run.

This attachment for the Nautiq robot is designed to accomplish M07 Kraken’s Treasure and M06 Raise the Mast from the FIRST LEGO League 2024‑2025 SUBMERGED competition. It features a passive treasure chest collecting mechanism and uses hooks to restrict the inertia-driven movement of the Mast, allowing fast movements without triggering it prematurely.

This attachment for the Nautiq robot is designed to collect the Trident Parts for M14, deliver the Shark for M02, and collect one Krill for M12 in the FIRST LEGO League 2024‑2025 SUBMERGED competition. It features a passive trigger for the krill collection and aligns the robot with the mission model before collecting the trident parts.

This attachment for the Nautiq robot is designed to lift the coral for M01 Coral Nursery from the FIRST LEGO League 2024‑2025 SUBMERGED competition. It performs two actions simultaneously: lifting the mission model loop and opening the door that holds the Reef Segments.

This attachment for the Nautiq robot is designed to accomplish M15 Research Vessel in the FIRST LEGO League 2024‑2025 SUBMERGED competition. It includes one detachable part: the hook is removed after collecting the Research Vessel, and the remaining part is used to deliver it to its target location.

This simple active pinless attachment for the Nautiq robot is designed specifically to accomplish mission M08 Artificial Habitat in the FIRST LEGO League 2024‑2025 SUBMERGED challenge. It offers a minimalist, efficient mechanism ideal for reliably completing the mission. No motors are required—setup is quick and intuitive. The compact design ensures stable performance and easy integration with the Nautiq robot.

These are 3D Building Instructions for an Alternative M14 Research Vessel mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. For the original mission model, see M14 Research Vessel.

These are 3D Building Instructions for an Alternative M11 Raise the Mast mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. For the original mission model, see M11 Raise the Mast.

These are 3D Building Instructions for an Alternative M10 Send over the Submersible mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. For the original mission model, see M10 Send over the Submersible.

These are 3D Building Instructions for an Alternative M08 Artificial Habitat mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. For the original mission model, see M08 Artificial Habitat.

These are 3D Building Instructions for an Alternative M13 Change Shipping Lanes mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. For the original mission model, see M13 Change Shipping Lanes.

This attachment for the Nautiq robot is designed to collect the Krill, the Reef Segments, and the Water Sample, while accomplishing M05 and M10 in the FIRST LEGO League 2024‑2025 SUBMERGED competition. It combines multiple functions to complete several missions efficiently in a single run.

This attachment for the Nautiq robot is designed to accomplish M10 Send over the Submersible in the FIRST LEGO League 2024‑2025 SUBMERGED competition. It uses a gear mechanism to lift a LEGO axle, allowing the submarine to slide to the other side.

This is an attachment for Kufar - Easy SPIKE Prime out-of-box robot. It solves M10 Sound Mixer using a passive attachment and collects Noah, the sound engineer using an inertial attachment.

This is an attachment for Kufar - Easy SPIKE Prime out-of-box robot. The attachment solves the light show mission using rubber bands! It works well, but it does depend on how new your model is. On newer models it can work with only 2 red rubber bands or even with 2 yellow and 2 red. Find the best combination for your field.

The trigger for the light show mechanism also releases Anna the Museum Curator and the masterpiece on the pedestal.

This is a robot attachment that could be used to lift object. The gear ratio of this attachment is allows it to lift Heavy objects. It's built with LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad. The goal of the attachment is to demonstrate the principle and example of an attachment for heavy lifting that could be placed on the robot. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.

With this LEGO Education SPIKE Prime attachment we accomplish the basketball mission from the FIRST LEGO League 2020 RePlay competition. The goal of the mission is to put the ball into the basket and to have the basket up at the end of the round. This is a complex attachment. It uses gear wheels and warm gears to transfer the power from the motor to the top of the attachment. At the top of the attachment there is a wheel with a rope. The rope is build with LEGO Education SPIKE Prime parts. If you have the chance, use a different LEGO rope, but if you don't that this one will be ok.

This is an attachment for the Kriket box robot. It demonstrates how to build attachments that glide over the robot, are pinless and could be quickly and easily replaced and changed with another attachment. This attachment also lifts. Quite cool. Quite cool.

This attachment is accomplishing three missions and partly two more missions from the FIRST LEGO League 2022-2023. It is for the Chain Monster robot

A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.

The offset beam creates a hook-like motion when rotating the gear, making "hooking" in loops an easy task.