Building Instructions
Filters:
Multi-axles mechanism instructions
Building instructions for a LEGO Mindstorms EV3 Multi-axles mechanism
- #71
- 03 Jan 2016
- 1
Extraction. Mission 05 from FIRST LEGO League 2018-2019 Into Orbit challenge
Background
To live away from earth, it would help if we were good at detecting and mining resources under the surfaces of other planets, moons, asteroids, and even comets.
Mission
The robot needs to get all the core samples out of the core site model, then it has options for what to do with them as described here, and in mission M03.
Scores
- Move all four core samples so they are no longer touching the axle that held them in the core site model: 16
- Place the gas core sample so it is touching the mat, and completely in the lander’s target circle: 12 OR
- Place the gas core sample completely in base: 10
- Place the water core sample so it is supported only by the food growth chamber: 8
- Possible Scores: 0, 16, 24, 26, 28, 34, 36
Scoring Requirements
- Results must be visible at the end of the match.
(mission descriptions source: https://www.first-lego-league.org/)
- #546
- 01 Jan 2016
Building instructions for Catapult Robot from LEGO Mindstorms kit
Building instruction for both EV3 and NXT. The whole catapult is build in exactly 78 steps.
- #223
- 14 Dec 2014
- 1
Reusable LEGO Geared Attachment 3
One LEGO gear is powering two LEGO Gears and at the end, from one motor we rotate two axles in opposite directions. Follow the building instructions.
- #216
- 16 Nov 2014
- 1
Bag 1 - 3D Cinema - FIRST LEGO League 2023-2024 MASTERPIECE
These are 3D Building Instructions for the 3D Cinema mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.
- #1670
- 09 Aug 2023
Pinless attachment from LEGO Education SPIKE Prime, with 3D building instructions
This is a pinless attachment built with LEGO Education SPIKE Prime parts and it demonstrates how to use pinless attachments. The goal of the attachment is to quickly place it on the robot without any pins. The attachment is used for pushing. Check out the courses below for more information how to use the attachment. The attachment is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions
- #1254
- 10 Mar 2021
Color sensor attachment for Inertia Bot - LEGO Mindstorms Robot with a large inertia cargo
This device is designed to be attached to "LEGO Mindstorms Robot with a large inertia cargo". It is a color sensor that goes on the caster wheel of the robot. In this case, the sensor will follow the robot.
- #832
- 16 Jul 2019
VEX IQ Robot Base Chassis 2
Vex IQ robot base which could be used with different attachments. The gravity center of this robot is in the backside and it has a lot of space in front for attachments.
- #312
- 10 Jul 2017
Attachment that is detached when accomplishing the mission, from LEGO Education SPIKE Prime, with 3D building instructions
This is an attachment that could be easily detached after a mission is accomplished. It's built with LEGO Education SPIKE Prime parts and it demonstrates an important principle for building attachments for robotics competitions like FIRST LEGO League/World Robotics Olympiad and others. You move with the robot, you complete the mission and you leave the attachment on the field when the mission is completed. In this way you save time when adding the attachment as it is most of the time pinless and takes a fraction of a second to put it. The attachment is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.
- #1258
- 14 Mar 2021
Swing game - LEGO SPIKE Prime robot
Swing game is a SPIKE Prime robot that is a game played by two people. The goal of the game is for both LEGO people to reach the center of the swing, without it tipping over on either side. The LEGO poeple are placed on motors, connected to two technic gear racks, that move along the swing. The motors are moved by two controllers, one using a color sensor and one using a Large motor. If one of the LEGO people moves too far without the other doing the same, the swing will tip and game over! Good luck and have fun!
- #1047
- 24 Jul 2020
Winner - VEX IQ Competition Robot for the 2018-2019 Challenge.
This robot was designed for the VEX IQ Challenge 2019-2020. It could push four hubs simultaneously. It can carry one. And it call pull itself on the bar at the end of the run. We've used four omni wheels of which the two at the back are the driving wheels.
Demo program can be found at Program for Winner - VEX IQ Competition Robot for the 2018-2019 Challenge.
- #844
- 12 Aug 2019
Alice, the rooster robot, built with LEGO Mindstorms EV3
Alice is a lovely little bird, with some amazing mechanisms on her feet. It uses two large motors and one medium one as a head, which drives both its wings.
- #646
- 22 Feb 2019
Mechanism for dropping a LEGO human carrier
Interesting and useful attachment for dropping a LEGO human at a specific location. It uses a lever and a gear wheel. When the lever is pressed the wheel rotates.
The attachment is constructed from LEGO Mindstorms EV3 sets.
- #352
- 08 Nov 2017
- 1
VEX IQ Easy Bot
VEX IQ version of an Easy Bot. It's simple and appropriate for classes of students.
- #309
- 29 Jun 2017
3D Printing. Mission 03 from FIRST LEGO League 2018-2019 Into Orbit challenge
Background
It is amazingly expensive to send heavy stuff like construction material into space, so scientists and engineers are instead learning how to print what they need in space, using available extraterrestrial elements.
Mission
The robot needs to get a regolith core sample and place it into the 3D printer, which will cause the 2 × 4 brick to pop out. The ejected 2 × 4 brick can then be delivered elsewhere for more points.
Scores
- The 2 × 4 brick ejected and completely in the northeast planet area: 22 OR
- The 2 × 4 brick ejected and not completely in the northeast planet area: 18
- Possible scores: 0, 18, 22
Scoring Requirements
- Results must be visible at the end of the match.
- Eject the 2 × 4 brick by placing a regolith core sample into the 3D printer. > Only allowed method. Must be obserserved by the referee.
(mission descriptions source: https://www.first-lego-league.org/)
- #544
- 01 Jan 2016
Building instructions for the attachment with the LEGO Technic Linear Actuator
This LEGO attachment connects a LEGO Mindstorms EV3 Motor with a LEGO Technic Linear Actuator. The connection is through a couple of gears which makes the whole instructions quite interesting and useful as an example.
The attachment was used during FIRST LEGO League 2014 Robotics competition.
- #118
- 12 Apr 2015
- 1
Reusable geared attachment 4 from LEGO Education SPIKE Prime, with 3D building instructions
This is the forth type of an active geared attachment. "Active" means that is is power by a motor. "Geared" means that it uses gears. "Reusable" means that you can easily extend the attachment with additional parts - eg - you can reuse it. It shows a basic principle of how power is transferred between different axles that have different orientation in space - like when one of the axles is horizontal and the other is vertical. It's built with LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad and others. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.
- #1267
- 23 Mar 2021
Front attachment from LEGO Education SPIKE Prime, with 3D building instructions
This is an attachment is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. On a robot most of the time you place attachments on the front/side/top. These instructions show how to build an attachment that could be placed on the front of the robot. The idea is to demonstrate the principle and you can expand and build a more specific attachment for the mission that you are accomplishing. Check the courses in which this attachment is used for more information and tutorials on how to use it.
- #1259
- 15 Mar 2021
Quick Pinless from LEGO Education SPIKE Prime, with 3D building instructions
This is an pinless robot attachment designed for taking loops. It's built with LEGO Education SPIKE Prime parts and it demonstrates how to collect a loop while moving with the robot. The attachment is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. There are other attachment that are designed for taking a loop and locking it so that it does not fall, but they are more complex. Search for 'Carabiner' at FLLCasts.com
- #1256
- 12 Mar 2021