Хващач за кран от ЛЕГО Майндстормс EV3
Това е още един ЛЕГО Майндстормс хващач, но този път той има 4 пръста! Те се движат едновременно с помощта на среден мотор. Този хващач е взет от Крон - Лего кран.
- #964
- 24 Jan 2020
Това е още един ЛЕГО Майндстормс хващач, но този път той има 4 пръста! Те се движат едновременно с помощта на среден мотор. Този хващач е взет от Крон - Лего кран.
This is the attachment of Team "Nightbeast", with which they solve M01 and M02 from FLL Into Orbit Challenge
Инструкции за дистанционно управление. При него се използва сензор за завъртане, който определя посоката на кормилото, и сензор за допир, който управлява движението. Тук ще откриете инструкции за подходящо шаси.
Дистанционното управление и колата изглеждат заедно така:
Building instructions for the One Attachment. Built from LEGO Mindstorms EV3 parts and with an Ultrasonic sensor we've used this attachment to accomplish most of the missions at FIRST LEGO League 2013.
SIngle robot attachment, many points.
Това е робот, направен да повдига чаша, докато я държи изправена! Той използва един голям EV3 мотор, закачен за брика, за да повдига чашата на всеки ъгъл, който искате! Чашата, която ние сме ви дали е изцяло за красота, но с няколко корекции, робота може да повдига и истински чаши! Все пак внимавайте около течности!
Do you have a friend for a sleepover? This might be the perfect robot for you! It is a football gate, guarded by Fint, the goalkeeper robot. You can control him, by using the remote controller, that consists of two Touch Sensors. Take turns making penalty shots and have a blast with this awesome robot!
What we recommend:
Building instructions for the LEGO Mindstorms attachment using Rubber Bands
We've separated the BigDaddy robot into a few smaller modules. This teaches modularity and gives you the option to reuse some of the modules and to look at specific modules.
The first of a series of attachments that we add to a World Robotics Olympiad LEGO Mindstorms Robot. The attachment is an example for collecting ping-balls. The robot and the attachment are in the same construction. The attachment is a base for a container that could be extended.
Мотивиран от петминутния робот, този робот си има собствени релси!
Този модул е направен като вертикален хващач с готин механизъм за затваряне. Той се задвижва от среден мотор. Хващача се използва в Графът – ЛЕГО Mindstorms робот за сграбчване и разчистване без колела.
This is the attachment of Team "Nightbeast", with which they :
1. Eject the 2x4 Brick by placing a Regolith Core Sample into the 3D Printer.
2. Crater Crossing
3. Tries to score a meteoroid( tries to shoot a ball)
From missions M03,M04 and M014 from FLL Into Orbit Challange
Минтонета (от англ. Mintonette) е името на една от първите версии на волейбол.
Роботът използва два сензора за допир с които да движи оръдието си наляво и надясно. За да стреля използва цветен сензор. На оръдието си има голям мотор отговорен за стрелбата и среден мотор който мести оръдието.
Инструкции за най-обикновения хващач, при който се използва само един голям ЛЕГО EV3 мотор. При него има един неподвижен и един подвижен лост.
This is a ping-ball containing attachment for a World Robotics Olympiad. The attachment is building with LEGO Mindstorms EV3 parts. It is tiltel so that it is easier for the balls to fall off at certain points, which was part of the missions at the 2015 cmpetition.
This frame holds the motor and ev3 brick used in the catapult. The frame is placed on top of the rotating base and thus could be easily rotated. The brick could be both NXT and EV3
Лабораторията е робот, който ще провери уменията ви по програмиране. Трябва да измерите обема на балона само чрез стойностите измерени от сензорите.
Конструкцията има вентил, с който можете да изпускате балона с различна скорост.
Как точно се поставя балонът в робота е пояснено в този урок.
Building instructions for the catapult that could be placed over the LEGO Mindstorms EV3 Brick. The idea of the catapult it to throw objects. The fact that it is over the brick makes it very convenient to place the motors below the brick and to use the Catapult.
This robot construction itself was used in the FIRST LEGO League Senior Solutions competition