This robotics video tutorial is about the FIRST LEGO League 2020 RePlay competition and how we accomplish the Slide mission with a LEGO Education SPIKE Prime robot. The goal of the Slide mission is to collect two LEGO Mini figures and bring them back to base. We are demonstrating a simple attachment that collects 2 figures placed in an add way. The whole attachment must bring one of the figures up and then back.
This is a 10 out of 10 video tutorial for the Slide mission at the FIRST LEGO League 2020 RePlay LEGO robotics competition. In the tutorial we demonstrate how to accomplish the mission 10 out of 10 times. At FLLCasts we try to build the attachments to be as consistent in their behavior as possible possible. In this way you know how the attachment along with the LEGO Education SPIKE Prime or LEGO Mindstorms robot will behave.
The Slide mission the FIRST LEGO League 2020 is about the LEGO Minifigures sliding down the slide and the robot bringing them back to base. We must somehow bring then back do base. Do we push them on the Slide? Do we pull them? Or we could lift them. In this video tutorial we decided to pull the minifigures, but there is a catch.
10 out of 10 tutorials for the Slide mission was a challenge. There were a lot of glitches with different attachments that we built. At the end we have an attachment that is able to reliably pull the mini figures up, then forward,then down which.
The goal of the Pull-Up bar mission is to have the robot pull up on the bar... ok.. wording. In this video tutorial we demonstrate an interesting attachment that helps the robot attach to the Pull-Up bar and hang there. How do we do this - with a platform, that brings the robot to the bar and then detaches itself from the robot
In this video tutorial we accomplish the Pull-Up bar mission from the FIRST LEGO League 2020. This is a 10 out of 10 tutorial for demonstrating the accuracy of the robot and the attachment. What you will learn is how a two part attachment works.
This 3D building instruction is about a FIRST LEGO League 2020 mission called the Slide mission. To accomplish the mission the LEGO Robot must take two LEGO minifigures from a slide and bring them back to base. The whole attachment is built only with parts from LEGO Mindstrorms Robot Inventor Set.
This video tutorial demonstrated the use of an active gear attachment for catching a wheel and pulling it. This is how we accomplish the Rowing Mission from the FIRST LEGO League 2021 competition. What you will learn is how such an attachment works. How you transfer power from the top of the robot where the motors are to the bottom of the robot where the catching mechanism is. Check out the building instructions for the attachment.
Accuracy and consistency is the topic of this tutorial, as all 10 out of 10 tutorials are at FLLCasts. We use a robot build only from LEGO Mindstorms Robot Inventor parts and we accomplish the mission 10 out of 10 times. You will see how we use an active gear attachment to catch the wheel and pull it to the black circle, which accomplishes the mission
This course presents Solutions and Review of the FIRST LEGO League 2021 RePlay competition and it uses LEGO MIndstorms Robot Inventor as a base. It is a mirror course to the LEGO Education SPIKE course for the same competition. For each mission in the competition the course contains the rules for the mission, a tutorial how to accomplish it, instructions for the robot that is used and instructions for the attachment that is used. Every lesson also contains a Scratch and a Python program for accomplishing the mission and of course a 10 out of 10 tutorial that demonstrated how reliable the approach is. Upon completion of the course you will have many new ideas about how to approach mission on every FLL robotics competition and how to help your team score more points.
This video tutorial had a different idea than what we recorded. We planned for a push/pull attachment as we've shown such attachments for LEGO Education SPIKE PRIME and LEGO MINDSTORMS EV3. However, the issues with LEGO MINDSTORMS Robot Inventor set 51515 is that we could not figure out an easy way to build a push pull attachment that meets our criteria for an attachment. Because of this we made a slight modification on the idea and it is again push/pull attachment but not moving in a line but in a circle - circular movement.
This attachment demonstrates pushing and pulling with a circular motion. It is useful for FIRST LEGO League competitions where you can grad a mission model and bring it back to base or push/pull on a lever.
This program controls a Push/Pull attachment build from a LEGO Mindstorms Robot Inventor 51515 set. Check out the tutorial, building instructions and lesson for this attachment and how the program is used.
A python program for a push pull attachment build from LEGO MINDSTORMS Robot inventor 51515 set. The program make the attachment push, or pull, depending on the direction. Check out the LEGO building instructions, tutorial and lesson for to successfully accomplish the mission with this Python program.
New technologies help us to store energy. Volcanic rocks can be heated in an insulated enclosure to store energy until it is needed.
Load energy units into the energy storage bin and then release the stored energy unit from the tray under the model.
The robot slides the people (called “slide figures”) down the slide and moves them to other areas.
Smart grids use electricity generated from all the different energy sources and distribute it to the consumer where and when it is needed.
Raise your field’s orange connector to complete the smart grid connection with the opposite field.
Factories use large amounts of energy to make the products we use such as toys.
Deliver energy units to the toy factory bin and release the mini dinosaur toy.
