The is the whole step-by-step process of connecting the motors with the Raspberry PI with the driver and the batteries. No scheme needed. Everything is already here. In the course, the motors are part of the car and the batteries are in the batteries holder, but with this scheme, you could see the whole process.
A 3D scheme on how to connect the front steering motor to the Raspberry PI. This includes the Motor Driver and the batteries. The rear motor is also on this scene.
3D scheme on how to connect the L298N Motor Driver to the Batteries. Follow the step-by-step instructions. Be careful about the PCB terminal connectors.
3D scheme with instructions on how to connect the L298N driver to the batteries and to the motor. Just that. Connecting to the Raspberry Pi is at a later stage of the course.
Целта на тези инструкции е да ви помогнат да построите ЛЕГО Mindstorms EV3 робот без колела. Трябва вие сами да помислите как точно да поставите колелата. Какви колела бихте използвали отпред? Как ще построите третото колело? Ето тук има някои препоръки за това как да построите третото колело - 1, 2, 3, 4
Можете да добавите хващач към тази конструкция по инструкциите тук.
This program uses the Move Steering block to controll the robot to move. Download and run the program.
EV3-G program for precise motor control of the LEGO Mindstorms EV3 robots
EV3-G program for using the ultrasonic sensor and detecting objects with it.
Program developed with EV3-G for stop and Move with the Ultrasonic Sensor
EV3-G program for following and object with the LEGO Mindstorms EV3 robots
In this program, we return the robot to a straight orientation at the end of the program. If there is not enough time for the Mindstorms Gyro sensor the correct the orientation of the robot before the end of the program, then we should do it at the end.
Proportional implementation for keeping the LEGO Mindstorms robot straight. The program will take the value of the Mindstorms Gyro sensor and will apply this value to the steering block. This will make the robot steer in a direction that would put the robot in a straight position again.
