Building Instructions

- note that you could attach it to the brick both sides, depending on which technique you would like to test. Use the video as a reference.

This construction uses a differential. Both wheels could turn with different speed and this makes a construction much more stable when turning. 

This is an active attachment with gears built from LEGO Education SPIKE Prime robotics set. The goal is to do a precise drop. The attachment could be used for both cargo items.

This is the robot that we use to demonstrate a solution for the World Robot Olympiad 2021 Junior competition. This is a Post season solution. We never release any solutions during the season as this will have a negative impact on the competition.

We started with this robot and it has a few good ideas. It can collect two cars at the same time. We later decided to go for a more powerful robot. Check out WRO 2021 Junior: Slaimi - a post season WRO competition solution robot

An attachment for accomplishing the Cargo Connect M01 innovation project model mission. It is used to guide the mission model.>

This attachment demonstrates the principle of dropping a part inside a container. It uses parts only from the LEGO MINDSTORMS Robot Inventor 51515 set. The goal of the attachment is to release a lever that is holding the wheel.

This is an attachment positioned below the robot and used for when we need to push something with the robot. It keeps the cargo in place while pushing. In this way we can achieve a consistent behavior with the robot, which is what we all want

These are instructions on how to build the:

• Cargo plane from innovation project bricks

You can find more building instructions and tips and tricks about the competition on this page.

These are instructions on how to build the:

• Train tracks
• 2x Train cars

You can find more building instructions and tips and tricks about the competition on this page.

These are instructions on how to build the:

• Switch engine

You can find more building instructions and tips and tricks about the competition on this page.

This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Cell Phone mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.

This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Slide mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.

You can't play basketball without a hoop. So here are the building instructions of a Basketball hoop built with LEGO Mindstorms 51515 Robot Inventor set. The other things you'll need to play this game at your own home are a Mindstorms/Duplo ball, which is included in the set, and, of course, a robot. This hoop construction was created to be used with the smallest Inventor robot Tricky and its Basketball attachment. When you are ready with the constructions, you have to program the robot and start playing. Who will score more points in this robotics basketball game?

You can find the LEGO set, with which this was built, by following this link.

You can find constructions created to play with Tricky, by following the links below:

1. Bowling Pins
2. Football Goal
3. Chain Reaction

These are instructions on how to build the:

• Boccia Aim

You can find more building instructions and tips and tricks about the competition on this page.

These are instructions on how to build the:

• Slide
• Slide Figures

You can find more building instructions and tips and tricks about the competition on this page.

As you might have seen, recently all the cool kids build tensegrity structures. So we decided to make one for those of you who have a Spike prime set and want to build one themselves! In addition this tensegrity structure requires only parts from the set, which means you don't need to tie any strings on beams or other parts!

At the top of the structure we have two fully functional motors! Can you make something cool with them?

Magazzino from italian means warehouse.

This robot is made to drag and hold on objects. It uses two Large motors to move around and one medium motor for a grabber. The grabber is at the front of the robot and consists of two "hands" that are each connected to two gears, which connect to the medium motor allowing them to function like a grabber.