Building Instructions

We've built a box robot chassis that could easily be extended with attachments for FIRST Technical Challenge competition.

If you ever felt that FIRST Technical Challenge is difficult and you don't know where to start from, building this Tetrix robot is the first thing that you could do. You would have 4 motors, plenty of space for attachments and good access to the phone.

The robot is built from a Tetrix Set without additional parts. It's a winning robot in just 109 steps 

We took a stab at building a box robot entirely with chains. It is difficult to find these chains. They were part of the original LEGO MINDSTORMS NXT Robots, but we had an idea. Can we power the whole box robot and all the attachments with the chains. This allows us to do a nice demonstration when and how chains could be used.

To build the robot you will need about 180 of these the chain pars - 3711a. They could be found from NXT and from some technic sets.

This robots require additional parts on top of the LEGO Education SPIKE Prime and LEGO Education SPIKE Essentials. Check out the additional parts required.

This is Cooley, and, it, is, coooooool. It got all the stuff the cool kids have - two motors at the top, two at the bottom, two wheels on the side and it is slim. Build a few attachments for it and take it on a ride during FIRST LEGO League competition

In the LEGO Mindstorms Robot Inventor set there is only one color sensor. The original Gazon is build from LEGO Education SPIKE Prime where there are two light sensors. The idea behind this robot is to be able to build it from Robot Inventor and to use it during FIRST LEGO League competitions

After the success of the original Gazon robot from LEGO Education SPIKE Prime, we've decided the build a similar robot, but from LEGO Mindstorms Robot Inventor 51515. Teams are participating in the FIRST LEGO League competition with a LEGO Mindstorms Robot Inventor set and we know it will be helpful. But this robot can not be build from a LEGO Mindstorms Robot Inventor 51515 as the set has only one Color sensor. We've build a version of the Gazon robot to address this specific limitation.

This almost box robot is build from the LEGO Mindstorms Robot Inventor set. The idea behind this robot is to be able to build it from Robot Inventor and to use it during FIRST LEGO League competitions

The Chain Monster is one of the coolest Box Robots that we've built. But what is a robot without attachments that can accomplish missions? These here are 3D building instructions demonstrating how the frame for the robot could be built. We've discussed frames in the Box Robots courses for EV3. Take a look at this one. See if it can inspire you to build robots and attachments in certain way to achieve consistent and reliable robot behavior.