Video tutorials

Inertia triggered attachments does no require the use of a motor. Let the inertia do all the work. These kinds of attachments are very useful at robotics competitions like FIRST LEGO League and World Robot Olympiad. The robot moves, the attachment falls and grabs the ball. The attachment uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.

In the final video we explore how to trigger the release of the attachment with just a rubber band. The release is triggered with a gear wheel that rotates in a specific way. This saves speed, does not require additional LEGO Mindstorms motor and is precise enough for a competition. 

Next robot construction for holding and releasing balls from this container. In this video we discuss the improvements and how to use the chains to release one ball at a time.

One of the most interesting challenges in the series of FLL Competitions. Move a block and add additional floor on top of the block without damaging the construction. In this tutorial we would focus only this mission and we would achieve two movements with only one motor which makes the attachment quite powerful.

In this episode I would like to show you a way to solve the FLL 2012 Medicine mission using an LEGO Mindstorms NXT Ultrasonic Sensor and a system of gears that converts circular motion to linear.

Improving the construction for the World Robotics Olympiad missions. The improvement is in the position of the sensor and the size of the balls container. 

Previously we caught the Truck with two rubber bands. The next step was to lift it. For lifting we used the Medium LEGO Mindstorms EV3 motors. In this video we are extending the attachment so that we could catch also the Ambulance. In forth video we would explore how to release both vehicles after transporting them.

In this second part we continue with the next few tasks from the FIRST LEGO League (FLL) 2013 competition. Using the same rubber band attachment we lift the house and collect a few of the humans and cargoes.

Reusable attachments are our favorite. They could be used in a number of different scenarios especially on robotics competitions like FIRST LEGO League/World Robotics Olympiad. This tutorial shows how this reusable attachment could accomplish a mission for lifting a lever. It uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.

Build a similar mechanism to this one. Similar, but for your robot. This is the task for you. Try, give yourself half and hour or even an hour.

In this tutorial we will go through a solution for three of the missions from 2012 FIRST LEGO League competition using only one attachment. By accomplishing the medicines, strength exercise and cardiovascular missions we earn 55 points. You can download the programs from the link in the Materials tab. 

Taking/Grabbing loops is one of the most common mission types at robotics competitions like FIRST LEGO League/World Robotics Olympiad. This tutorial is about an attachment that grabs the loop. The attachment uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.

This tutorial shows how quick pinless attachment collects loops. Such attachments are popular at the FIRST LEGO League competition. The attachment uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.

Connect the attachment to the box robot and find the correct number of rotations of the middle motor that would bring the robot up and forward and would attach it to the mission model.

Remember the passive/active attachment separation that we are making at FLLCasts.com. This applies for all the attachments and in this Episode, we are looking at how to use a passive attachment.  

This quick pinless attachment is designed for collecting parts by pushing them. It shows the principle of putting a robot of an attachment in a very fast manner. Such attachments are popular at the FIRST LEGO League competition. The attachment uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.

How great is the great attachment for lifting that we built in this course? How many times can it lift the robot without making an error? How great are your attachments and how could you test them? - the answer is simple. Just try 10 times and they should work at least 9 of them as our attachment is.

This animation demonstrates a vertical lift attachment. This is an attachment that transfer a circular motion from the motors to a linear motion and is a very powerful concept. We demonstrate it with a LEGO MINDSTORMS Robot Inventor robot build from 51515 set. This is arguably one of the most complex attachments in this course.

There were a few problems with the 40 teeth gears that we were using. Let's list some of them

One of the simplest tricks in the game - move, complete the mission and leave the attachment with the mission model. You don't have to return the attachment to the base. On some competitions there might be penalties, but it might be worth it, as you save time to complete another mission. This works especially well with large attachments.. The attachment uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.

The M08. AEROBIC EXERCISE is one of the very common types of mission in FIRST LEGO League robotics competitions. I think this pattern of missions was first introduced with the growing abilities of the participating students that were constantly reaching the maximum number of points. So the competition introduced mission that require a lot of time - 20-30 seconds, are time consuming and are complex. They requires a lot of moves. This here is a video tutorial on how it could be accomplished

Think of an attachment that leaves the Gecko on the mission model. Don't use the robot attachment that we already have. Just the box robot and the gecko. Nothing should support the Gecko when it is hanged on the mission model. 

This animated video tutorial demonstrate the use of a lift attachment to accomplish loops mission. It is a lift attachment with a circular motion

In this tutorial, we add another mission to our current program. This mission is - hanging the Gecko from the FIRST LEGO League Animal Allies. 

In this video tutorial we demonstrate an attachment that can accomplish Drop missions. A drop mission is when you have to move on the FIRST LEGO League field with the robot, reach a mission model, and drop a part in this mission model. First time we saw such missions I think was in FLL 2013. The attachment, the robot and the mission model could be build from a single LEGO MINDSTORMS Robot Inventor 51515 set. The mechanism for dropping works by releasing a lever when the attachment is pushed against the mission model. Check them out.

We calculate the number of rotatios when a gear system is involved. The driving wheel will have to do a number of rotations for the driven wheel to rotate to a desired number of degrees. In our specific case when the driven gear wheel is rotate to about 90 degrees the legs will lift the robot.

This is a live video tutorial of an inertia triggered attachment build with LEGO MINDSTORMS Robot Inventor. The attachment, the robot and the mission model are all built from a single 51515 set. The cool thing about inertia triggered attachments is that they are active and are activated without the use of any motors which means that you have the motors for the other missions at FIRST LEGO League competitions. In the tutorial we demonstrate and explain how such attachments works and how they could be used.