За преподавателя: Поставете сензор за допир, без да използвате инструкции
Какво е разрешено и какво не при построяване на робота без инструкции.
- #432
- 03 May 2017
Какво е разрешено и какво не при построяване на робота без инструкции.
Each palette contains programming blocks that share common purpose. We will cover most of them
The important task before the solution. If you haven't done it already, then attach a new axle at the front of the robot and extend the construction with gear wheels and axles to reach the two legs at the two sides of the robot.
As an exercise try to implement the calibration of the minimum and maximum values for a single sensor.
Има няколко неща, за които да внимавате, когато учениците работят с брика.
In this episode I will show you how to program the touch sensor part of the LEGO Mindstorms education robotics sets. I have given answers to questions like - how the touch sensor works or how you can use it.
Implement the program for array initialization.
Follow the video tutorials for initializing arrays and implement the program.
Насърчаваме ви да изучавате софтуера сами.
Let's make a competition - there is a pole that the robot must turn around and return home.
The task in this tutorial is to execute the program 10 times and to do it yourself. If you have your attachment then use it. If you have our attachment then use it. But execute the program 10 times and make sure that it works.
Sometimes the answer that you get by calculating seems not to be right. Is it the calculation that is wrong. Probably it is not the calculation, but something is happening with the robot.
Robots could do chores for us and they must consider the load of the cargo or the robot could be damaged.
Sometimes a good teacher needs a few tricks in his sleeve, so that he can surprise and entertain his students.
We will take a look at the EV3 motors and will go into details about them
This video tutorial shows how the LEGO Mindstorms EV3 Handlebar Chopper Motorcycle robot works. See how fast it is.
Our next robot is called CastorBot, because of the castor ball.
This video tutorial contains a detailed explanation on how we accomplish the FIRST LEGO League 2018-2019 Into Orbit mission called M05. EXTRACTION. On every robotics competition we have the challenge to collect, carry and return to base a number of objects. It is just in different way every time.
Why we will never use seconds in our lessons.
Let us do a quick recap of the whole lifting mission and its solution
В това занятие ще програмираме робота да показва емоции!
We will demonstrate with a robot what the acceleration is and the effects of high and low acceleration.
This video tutorial contains a detailed explanation on how we accomplish the FIRST LEGO League 2018-2019 Into Orbit mission called M14. METEOROID DEFLECTION. The mission is a simple throw of a ball. But of course the ball should reach a specific mission model and arrive at a specific place. And that's always challenging.
An interesting question that has arise is whether we can use the LEGO Mindstorms EV3-G Software to program the NXT brick. In this episode we will go through the blocks from the EV3-G Software and see which works with the NXT Hardware and which does not.
Every turn is a circular motion and we will review the three types of turns from this point of view.
Following the previous tutorials from the course, implement the calibration of the minimum and maximum values.
Време да приложим всичко научено досега на практика. Да направим робот шпионин!