Building Instructions

3D building instructions for the water reservoir mission model from the FIRST LEGO League 2022 SUPERPOWERED competition. Find the parts in Bag 12

3D building instructions for the watch television LEGO mission model from the FLL 2022 competition

Forth version of a reusable gear attachment. Again, it powers two axles and this time there is a lever connected to one of the axles.

Drop mission model developed with a LEGO Education SPIKE Prime. The mission is to move and drop and object in the mission model. This triggers the mission model. It is a popular mission at FLL competitions. In 3D building instructions for you to construct.

This robot looks a bit weird. Can you guess why? The motors are placed in opposite directions. One of the motors is facing "forward" while the other one is facing "backwards". This means that if you tell both motors to rotate forward the robot will just rotate! To make the robot move forward, you will need to make one of the motors rotate forward and the other one - backwards.

The goal of this robot is to teach students that motors could be placed in many different ways. It is not always the case that the two motors face the same direction and this needs to be accounted for during programming.

Famulus means waiter in Latin.

One pumpkin spice latte coming right up! This robot is made to serve the best drinks in the whole continent! It is one of the simpler robots that can be made with the LEGO SPIKE Prime set and it uses two medium motors to move around. The coolest part about the robot is the cup holder where a "cup" can be attached or removed. Bottoms up!

This is an attachment for extracting the raw materials. This attachment is made for Kamak box robot.

The program for this attachment is FLL 2018: Attachment To Accomplish The Into Orbit Extraction (05) Robot Game With Kamak - Box Robot - Demo Program

Simple mission model, that can be used for competition preparation in class. The model consists of two parts - a stand that can be fixed on a mat, floor or table using a double sided tape and a barbell. The aim is to either take the barbel from the stand and bring it to a target location or the other way round.

This flip attachment from LEGO MINDSTORMS Robot Inventor 51515 set is design to flip parts. It can flip a manhole for example, but could also flip other parts. The principle of flipping is quite interesting as it uses two axles and a border.

This is an Inertia triggered attachment build with a LEGO MINDSTORMS Robot Inventor 51515 set. With this attachment we can collect different parts and bring them back to base at FIRST LEGO League competitions. The principle is useful as no additional motors are required for activating this attachment. In the same time it is active which means that it moves and can change it's position in space separately from the robot.. which is useful

These are instructions on how to build the:

• Doorstep
• Package

You can find more building instructions and tips and tricks about the competition on this page.

These are instructions on how to build the:

• Turbine blade
• Blue holder

You can find more building instructions and tips and tricks about the competition on this page.

Purpose

We want students to be able to easily find the parts and to put the parts back in the designated compartments.

Printing instructions

Files are printed on both sides of 160-gram sheet of paper A3 format.

The sorting sheet is designed to fit in the cover of the box. To gather in the lid, the excess parts of the printed sheet must be cut off the markers on the front of the sheet.

To extend the life of the sheets, you can laminate them either with a "laminate matte" or a simple laminate. The disadvantage of the simple laminate is that there is a lot of gloss. The disadvantage of laminate matte is that it has to be sealed with a clear PVA C-200 adhesive to prevent it from opening over time.

Turning direction

We recommend printing doublesided and turning over the "short edge", like a book. If you decide, you may flip the printed result over the long side. Both options are available at you local print center.

Building instructions for the dispenser mission model. The models is used in the Logistics mission of FLLCasts Off-season Challenge 2019.

Building instructions for the gear attachment.