Building Instructions

These are instructions on how to build the:

• Train tracks
• 2x Train cars

You can find more building instructions and tips and tricks about the competition on this page.

This magical wardrobe is for little dolls wear and bags. It could be a part of every doll play at any time. Yes. We have daughters.

Go, robot, grab the ball!

If you want to have some fun and play some ball grabbing with your Mindstorms Robot Inventor 51515 set, these are the building instructions you'll need. As you probably know, Tricky is the smallest robot made from this set. With this ball grabbing attachment, you could program Tricky to grab the Mindstorms/Duplo ball, which is included in the set, and place it wherever you want.

You can find the LEGO set, with which this was built, by following this link.

You can find other attachments for Tricky, by following the links below:

1. Basketball attachment
2. Kick the ball attachment
3. Writing attachment
4. Turning attachment

You can find constructions created to play with Tricky, by following the links below:

1. Bowling Pins
2. Football Goal
3. Chain Reaction
4. Basketball hoop

This is the attachment to accomplish Fll 2019 M10 mission with the Dominator robot. You can see how to attach the attachment to the robot in this tutorial.

In this spreadsheet, we have the values for the Integral part and the Gyro sensor for moving straight with the robot.

The building guide for the FIRST Technical Challenge Push Bot build with the Tetrix set

You can't play basketball without a hoop. So here are the building instructions of a Basketball hoop built with LEGO Mindstorms 51515 Robot Inventor set. The other things you'll need to play this game at your own home are a Mindstorms/Duplo ball, which is included in the set, and, of course, a robot. This hoop construction was created to be used with the smallest Inventor robot Tricky and its Basketball attachment. When you are ready with the constructions, you have to program the robot and start playing. Who will score more points in this robotics basketball game?

You can find the LEGO set, with which this was built, by following this link.

You can find constructions created to play with Tricky, by following the links below:

1. Bowling Pins
2. Football Goal
3. Chain Reaction

This is the attachment of Team "Nightbeast", with which they :
1. M10–Food Production
2. M12–Satellite Orbits
3. Move the Cone Module to base
From Missions M06, M10 and M12 from FLL Into Orbit Challenge

The run with this attachment is very inconsistent and fails very often.

These are instructions on how to build the:

• Switch engine

You can find more building instructions and tips and tricks about the competition on this page.

This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Boccia mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.. With this attachment we follow the line with the robot until we reach the team mission and we use the lever on the top to push the blue box. Then we follow the line to reach the Boccia mission, and three things happen: 1. align to the mission model with the front of the attachment, 2. turn the lever to release the green boxes and 3. move the lever to push on the mission model. This is a complex mission requiring a lot of coordination from the robot. Quite interesting I must say.

Simple mission model, that can be used for competition preparation in class. The model consists of two parts - a stand that can be fixed on a mat, floor or table using a double sided tape and a barbell. The aim is to either take the barbel from the stand and bring it to a target location or the other way round.

User this flywheels construction for experiments in physics. Start rotating the wheel and they would accumulate energy. You can try to calculate this energy and to measure how fast it would be consumed.

The construction is built with LEGO Mindstorms EV3

Instructions for building the five minutebot used in the tutorial.

These are instructions on how to build the:

• Hinged container
• Container contents

You can find more building instructions and tips and tricks about the competition on this page.

This is an attachment for extracting the raw materials. This attachment is made for Kamak box robot.

The program for this attachment is FLL 2018: Attachment To Accomplish The Into Orbit Extraction (05) Robot Game With Kamak - Box Robot - Demo Program

Building instructions for the dispenser mission model. The models is used in the Logistics mission of FLLCasts Off-season Challenge 2019.