- 19 Apr 2015
- 05 Feb 2013
Building instructions for the speed bump mission model. The models is used in the Speed bump mission of FLLCasts Off-season Challenge 2019.
- 22 May 2019
This is the attachment of Team "Nightbeast", with which they :
1. M10–Food Production
2. M12–Satellite Orbits
3. Move the Cone Module to base
From Missions M06, M10 and M12 from FLL Into Orbit Challenge
The run with this attachment is very inconsistent and fails very often.
- 17 May 2019
A 3D scheme on how to connect the front steering motor to the Raspberry PI. This includes the Motor Driver and the batteries. The rear motor is also on this scene.
- 10 Apr 2018
Building instructions for a VEX IQ attachment for throwing balls with rubber bands.
- 13 Apr 2017
The building guide for the FIRST Technical Challenge Push Bot build with the Tetrix set
- 09 Apr 2017
User this flywheels construction for experiments in physics. Start rotating the wheel and they would accumulate energy. You can try to calculate this energy and to measure how fast it would be consumed.
The construction is built with LEGO Mindstorms EV3
- 24 Oct 2015
Instructions for building the five minutebot used in the tutorial.
- 08 Feb 2013
- 04 Aug 2020
- 01 Jan 2020
Simple mission model, that can be used for competition preparation in class. The model consists of two parts - a stand that can be fixed on a mat, floor or table using a double sided tape and a barbell. The aim is to either take the barbel from the stand and bring it to a target location or the other way round.
- 30 Oct 2017
- 16 Jan 2017
- 23 Aug 2015
These are instructions on how to build the:
- Weight Machine
You can find more building instructions and tips and tricks about the competition on this page.
- 31 Aug 2020
Remilo comes from esperanto and means paddle.
The robot resembles a boat, but moves on land. It uses two large motors with "paddles" attached to them to move. Because its movement capabilities are limited, it has a gyro sensor to correctly move forward.
- 17 May 2019
- 17 Oct 2015
Building instructions for the gear attachment.
- 12 Apr 2013
Swing game is a SPIKE Prime robot that is a game played by two people. The goal of the game is for both LEGO people to reach the center of the swing, without it tipping over on either side. The LEGO poeple are placed on motors, connected to two technic gear racks, that move along the swing. The motors are moved by two controllers, one using a color sensor and one using a Large motor. If one of the LEGO people moves too far without the other doing the same, the swing will tip and game over! Good luck and have fun!
- 24 Jul 2020
Luna 3 comes from the soviet spaceship with the same name, that was the first to take a picture of the far side of the moon.
This robot is made to hold a phone, that can be used as a camera to take a picture of the far side of the moon. The robot is pretty simple, it uses two large EV3 motors to move around and also has a stand for the phone. The stand is made to work with most phones, but you can easily modify it to work with any camera.
- 15 Feb 2020