Building Instructions

This attachment is meant to be built on the robot Francesco 2. When the red connector for the transmission connects the two axles for the rear gear wheels, the differential locks and the motor starts evenly transferring its power to both wheels.

When the red connector for the transmission is pushed to the side, the differential unlocks and once again transfers its power to the wheel with least resistance.

You can see empty beams hovering over this attachment. They are there so you can attach a lever construction over it, to help with the locking and unlocking of the differential. Similar leaver can be seen in the robot Catapult.

This is the base module of EV3 Kinesthetic and Memory Game. The goal of this module is to present a variety of places for the rest of the modules to be attached.

This module is meant to be used in EV3 Kinesthetic and Memory Game and is attached to the base of the robot. This is the simplest module for constructing and programming. At the bottom, a channel is left for the cable to pass through.

This is an addition for Welder - super simple Motorcycle built with LEGO Mindstorms EV3. It allows the motorcycle to drive on its back wheel and perform cool tricks that way. Exactly what tricks, you will have to find on your own!

These are instructions on how to build the:

• Tan Building Units

for the FIRST LEGO League 2019-2020 City Shaper Challenge.

You can find more building instructions and tips and tricks about the competition on this page.

These are instructions on how to build the:

• White Building Units
• Blue Building Units
• Building Upgrades

for the FIRST LEGO League 2019-2020 City Shaper Challenge.

You can find more building instructions and tips and tricks about the competition on this page.

These are instructions on how to build the:

• Steel Structure

for the FIRST LEGO League 2019-2020 City Shaper Challenge.

You can find more building instructions and tips and tricks about the competition on this page.

These are instructions on how to build the:

• Swing
• Traffic jam

for the FIRST LEGO League 2019-2020 City Shaper Challenge.

You can find more building instructions and tips and tricks about the competition on this page.

These are instructions on how to build the:

• Bat
• Inspection drone
• Support axles
• Coach Pins
• Precision tokens
• Dridge Entrace
• Bridge Top

for the FIRST LEGO League 2019-2020 City Shaper Challenge.

You can find more building instructions and tips and tricks about the competition on this page.

These are instructions on how to build the:

• Elevator
• Test building

for the FIRST LEGO League 2019-2020 City Shaper Challenge.

You can find more building instructions and tips and tricks about the competition on this page.

These are instructions on how to build the:

• Bridge Ramp

for the FIRST LEGO League 2019-2020 City Shaper Challenge.

You can find more building instructions and tips and tricks about the competition on this page.

These are instructions on how to build the:

• Tree

for the FIRST LEGO League 2019-2020 City Shaper Challenge.

You can find more building instructions and tips and tricks about the competition on this page.

These are instructions on how to build the:

• Red Building Units

for the FIRST LEGO League 2019-2020 City Shaper Challenge.

You can find more building instructions and tips and tricks about the competition on this page.

These are instructions on how to build the:

• Bridge Road

for the FIRST LEGO League 2019-2020 City Shaper Challenge.

You can find more building instructions and tips and tricks about the competition on this page.

These are instructions on how to build the:

• Crane

for the FIRST LEGO League 2019-2020 City Shaper Challenge.

You can find more building instructions and tips and tricks about the competition on this page.

This field has a square canvas size of 1000mm.
The round sumo circe is with an outside diameter of 770mm.
There is a cross to incate the center of the ring for easier measuring to it.
The filed should be printed on a 1000mm X 1000mm canvas with 100% scale and 0 margins.
 

Instructions for building a LEGO truck. We use a medium motor for steering and a large motor for driving one of the rear wheels.

This drag car is a two-motor version of the Drag car robot. With more motors comes greater power!

This robot was designed for the VEX IQ Challenge 2019-2020. It could push four hubs simultaneously. It can carry one. And it call pull itself on the bar at the end of the run. We've used four omni wheels of which the two at the back are the driving wheels.

Demo program can be found at Program for Winner - VEX IQ Competition Robot for the 2018-2019 Challenge.

Francesco 2 is inspired by the robot Francesco.

Building instructions for a simple car using an EV3 Large motor for turning the front wheels and EV3 medium motor with differential for driving the rear wheels. Differently, from Francesco, Francesco 2 has space where a locking mechanism is meant to be built for the differential.