Tetrix FTC. Task. Cut and prepare a pipe

This is the task for you. We've shown you in the previous tutorials how to do it, how to use a drill and a hacksaw and a grinding stone to cut and shape a PVC pipe. Now it's your turn. Don't forget to show us pictures -> right here in the comments section

  • #576
  • 12 Jun 2017
  • 1:08

FTC cut template for a pipe to collect and store balls

Drawing on how to cut a pipe to be able to collect and store balls in this pipe. The sheet format is ISO A4 and the drawing size is real (100% scale)

English

As we've discussed the shape of the pipe, the length of the pipe and it's now time to actually cut the pipe. So, take your tools and download the template that we've provided for the pipe. Once you have the template it's on a sheet of paper, print it then cut this template, then apply this template with a glue to the pipe, then with a permanent marker draw around the template and as you draw around the template you'll have a line that you can then use as a guide to cut. And we'll of course provide some more videos in the next few months of how exactly we draw the template and how we use the template but for now just download it, print it and apply to the pipe, draw with a permanent marker and then cut with the drill, with different tools, with the hacksaw and at the end you should have the pipe.

Courses and lessons with this Tutorial

This Tutorial is used in the following courses and lessons