For World Robotics Olympiad Ball Collection competitions we prepared an interesting Robot Base Chassis that could be extended with a container. The container contains the ping-pong ball. A mechanism collects them. This LEGO Mindstorms EV3 building instructions are for the chassis of the robot and were one of the versions from a series of robots.
Building instructions for the robot used in WRO 2014. It is a small robot with two light sensors and could be used for collecting elements.
The robot is built from LEGO Mindstorms EV3 parts.
Този робот бе създаден за да брои пари. Вратата за монети се плъзга и завърта жироскопичния сензор, което му позволява да измери размера на монетата, която е влязла в касата. Сменяйки отворите, на които се крепи гредата на жироскопичния сензор, се променят границите на сработване на сензора.
Важно: тази конструкция изисква лего-ластик.
This is one of the robots used in World Robotics Olympiad. It uses chains to move ping pong balls out of a container.
Тактилна игра за памет работи с програма, която може да изтеглите от тук. В инструкциите на този робот ще видите комбинация от 7-те модула, които го изграждат:
Този робот е предназначен да бъде много модулен и да предостави възможност на собственикът му да го надгражда и променя.
This is a version of the Gazon robot that has a single color sensor and is useful for cases where you still have not purchased a second color sensor, but need to start working on the FLL competition season missions
Коди е робот, създаден да се движи в права линия. Той има един единствен мотор, задвижващ две колела. Зад мотора се крие сензор за цвят. Комбинирайки мотора със сензора, Коди може да се програмира да измерва колко е дължината на всяка ивица от различен цвят, създаващ един същински баркод-четец.
Това приспособление се строи върху "LEGO робот, който използва инерцията". То представлява сензор за цвят, който се окача върху опорното колело на робота и го следва.
Swing game is a SPIKE Prime robot that is a game played by two people. The goal of the game is for both LEGO people to reach the center of the swing, without it tipping over on either side. The LEGO poeple are placed on motors, connected to two technic gear racks, that move along the swing. The motors are moved by two controllers, one using a color sensor and one using a Large motor. If one of the LEGO people moves too far without the other doing the same, the swing will tip and game over! Good luck and have fun!
Pallo, from ancient Greek, means to throw or to hurl, which is a part of the modern name "catapult".
Pallo is a robot made of two parts. The first part of the robot is the catapult! It has no electronic parts and uses two rubber bands to shoot a projectile to the second part. The second part is the target. It has a color sensor, which through a piston with different colored sections, determines how accurately the target has been hit! Good luck with the shooting!
This WRO robot is designed to collect a lot of ping pong balls in its container. It's built with LEGO Mindstorms EV3 45544 and 45560 sets. These are the LEGO Educational sets. The robot has two chains that collect the balls and push them into the container attachment. This is one of the larges robots we've uploaded at FLLCasts yet. You could learn a lot by following the building instructions and paying attention to the details of how this robot is built. All the alignment, all the connections. Really beautiful.
Robot for collecting ping pong balls used in the World Robotics Olympiad competitions. It is constructed with LEGO Mindstorms EV3
The first of a series of attachments that we add to a World Robotics Olympiad LEGO Mindstorms Robot. The attachment is an example for collecting ping-balls. The robot and the attachment are in the same construction. The attachment is a base for a container that could be extended.
This is a ping-ball containing attachment for a World Robotics Olympiad. The attachment is building with LEGO Mindstorms EV3 parts. It is tiltel so that it is easier for the balls to fall off at certain points, which was part of the missions at the 2015 cmpetition.
Инструкции за робот, построен от ЛЕГО Mindstorms EV3. Казва се Франкенщайн, тъй като двата мотора са противоположни.
This is the robot that we use to demonstrate a solution for competition. This is a Post season solution. We never release any solutions during the season as this will have a negative impact on the competition. But after the competition we try to make a review and to see how we could have accomplish it. Our goal is to be better for next year.
This robot is quite powerful. The attachment mechanism on the front is one of a kind as it can do several things with a single motor: it can lift, it can unlock, it can grab. All of this thanks to the unique mechanism of gears
LEGO Mindstorms Robot Base for a high placed attachment for containing ping pong balls. It is interesting how the balance is achieved with such an attachment. It was only one of the version in a series of LEGO Mindstorms Robots for World Robotics Olympiad.
