- 16 Jan 2017
Instructions for building the five minutebot used in the tutorial.
- 08 Feb 2013
Сложното в този механизъм са краката на стоножката. По-долу имате инструкции за тях.
Останалата част от стоножката трябва да създадете сами по картинката по-долу.
Този робот трябва да се свали, за да се построи.
- 05 Feb 2013
Simple mission model, that can be used for competition preparation in class. The model consists of two parts - a stand that can be fixed on a mat, floor or table using a double sided tape and a barbell. The aim is to either take the barbel from the stand and bring it to a target location or the other way round.
- 30 Oct 2017
Building instructions for the truck mission model. The model is used in the Road assistance mission of FLLCasts Off-season Challenge 2019.
- 22 May 2019
This is the attachment of Team "Nightbeast", with which they :
1. M10–Food Production
2. M12–Satellite Orbits
3. Move the Cone Module to base
From Missions M06, M10 and M12 from FLL Into Orbit Challenge
The run with this attachment is very inconsistent and fails very often.
- 17 May 2019
This is the good not so old Pesho Bot Chassis with a "two bars" lifting mechanism and a hand. It can be build with any set. Only the omni-wheels are extra, but what is a good robot without an omni-wheels.
The program for this robot is at programs/a6hrcz-pesho-bot-with-two-bars-lifting-mechanism-controls-with-modkit
- 12 Dec 2018
The data log from the experiment when moving forward and keeping straight with an implementation for Proportional compensation.
- 10 Jan 2018
- 21 Nov 2013
Building instructions for the container mission models. The models are used in the Automated delivery mission of FLLCasts Off-season Challenge 2019.
- 22 May 2019
It's the second version of VEX IQ Easy Bot. It's simple as the first one, but the motors are rotated.
- 29 Jun 2017
The building guide for the FIRST Technical Challenge Push Bot build with the Tetrix set
- 09 Apr 2017
These are instructions on how to build the:
- Red Building Units
for the FIRST LEGO League 2019-2020 City Shaper Challenge.
You can find more building instructions and tips and tricks about the competition on this page.
- 21 Aug 2019
Building instructions for the speed bump mission model. The models is used in the Speed bump mission of FLLCasts Off-season Challenge 2019.
- 22 May 2019
This is an 8 bar lifting robot. Way should I build this instead of Roberto bot you ask? Because it is... well... it lift thing straight up, it lift 'em higher, it's more beautiful than Roberto and is more bad ass looking than 4 bar lifting mechanism. OOoohhh, and one more thing it may use the same program as Roberto Bot With Four Bars Lifting Mechanism.
- 16 Feb 2019
This is a simple chassis that uses two motors to control the robot and two omni wheels at the back for greater maneuverability. It also have low center of the mass which makes it more stable for higher attachments.
The program for this robot is at programs/uxgw6b-roberto-bot-chassis-controls-with-modkit
- 06 Feb 2019
3D Instructions on how to add a diode to the Raspberry Pi and indicate when the Raspberry Pi is turned on.
- 10 Apr 2018
Building instructions for a VEX IQ attachment for throwing balls with rubber bands.
- 13 Apr 2017
- 19 Apr 2015
Building instructions for the gear attachment.
- 12 Apr 2013